LIST OF REFERENCES


Abdel-Fattah, H., and Ahmad, S. H., 1989, "Behavior of Hoop-Confined High-Strength
 Concrete under Axial and Shear Loads," ACI Structural Journal, Vol. 86, pp. 652-
 659.

Abdelrahman, A. A., and Rizkalla, S. H., 1999, "Deflection Control of Concrete Beams
 Pretensioned by CFRP Reinforcement," Journal of Composites for Construction,
 Vol. 3, No 2, pp. 55-62.

ACI Committee 318, 2002, Building Code Requirements for Structural Concrete,
 American Concrete Institute, Farmington Hills, MI.

Alsayed, S. H., and Alhozaimy, A. M., 1999, "Ductility of Concrete Beams Reinforced
 with FRP bars and Steel Fibers," Journal of Composite Materials, Vol. 33, No 19,
 pp. 1792-1806.

ASTM, 2001, ASTM C39 / C39 M 01 Standard Test Method for Compressive Strength
 of Cylindrical Concrete Specimens, American Society for Testing and Materials,
 West Conshohocken, PA.

ASTM, 2003, ASTM C31 / C31 M 03a Standard Practice for Making and Curing
 Concrete Test Specimens in the Field, American Society for Testing and Materials,
 West Conshohocken, PA.

ASTM, 2004, ASTM C172- 04 Standard Practice for Sampling Freshly Mixed Concrete,
 American Society for Testing and Materials, West Conshohocken, PA.

Baker, A. L. L., 1956, "Ultimate Load Theory Applied to the Design of Reinforced and
 Prestressed Concrete Frames," Concrete Publications Ltd, London, p. 91.

Baker, A. L. L., and Amarakone, A. M. N., 1964, "Inelastic Hyperstatic Frames
 Analysis," Proceedings of the International Symposium on the Flexural Mechanics
 of Reinforced Concrete, ASCE-ACI, Miami, pp. 85-142.

Barbero, E. J., 1998, "Chapter 7: Failure and Strength Design," Introduction to
 Composite Materials Design, Taylor and Francis, Philadelphia, PA, pp. 181-230.

Budek, A. M., Priestley, M. J. N. and Benzoni, G., 2000, "Inelastic Seismic Response of
 Bridge Drilled-Shaft RC Pile/Columns," Journal of Structural Engineering, Vol.
 126, No 4, pp. 510-517.