IV. PROGRAM OPERATION


 Unless you are using a hard disk drive system, you should
make a backup copy of the program diskette. Procedures for
making backup copies are described in your microcomputer
operating manual. Below are instructions for using CITMIX
according to which type of microcomputer you have.

 DOS MICROCOMPUTERS:

 If your system is already on, insert the CITMIX diskette
into the secondary disk drive and type "CITMIX." If your system
is not on, "boot" your system as explained in your DOS operating
manual. The manual will also instruct you on how to access the
disk drive that the CITMIX diskette is in.

 If your system has a hard disk,. you may wish to copy the
file CITMIX.COM to a directory on the hard disk. Once that file
is copied, you can run the program by typing "CITMIX" while in
that directory.

 PRO 350/380 MICROCOMPUTERS:

 Install CITMIX as an application using the INSTALL
APPLICATION option on the DISK SERVICES menu. If you have the
COMMAND LANGUAGE application installed, you could instead copy
the file CITMIX.TSK to a directory on the hard disk. Then, you
can run the program just by typing "RUN CITMIX" while in that
directory. The program will accept only REAL numbers at the
prompts for the amount of water, the pesticide rate, and the
spray concentration. If you do not enter real numbers, the
program may "bomb" or calculate incorrect spray instructions.



This space reserved for future listings of other computer systems.