6. Broken or improperly ad-
justed fan belts. The belt ten-
sioner should be adjusted to
have a 1/2-in clearance.
That's how its shown in Fig
74. TM 9-2300-216-20 or
within "Operating Range"
as shown in Fig. '2, Ch I.
TM 9-2320-238-20.


 If the belts are badly worn
or any one is broken, replace
the whole set. They come as a
matched set (4 belts). Order
Kit, belts V: fan, FSN 3030-,
780-7001. -M


 1. Dirty filter pac. Cleaning the filter pac is a daily afrer-opcratlon job. Let thar
pac go dirty, and you're asking for trouble. In severe duist operation, \ou
may have to clean them several times a day. The right way to remove and
clean the filter pacs is spelled out on page 110, TM 9-2300-216-10 and pages..
97 and 98, TM 9-2320-238-10. You can shake, use compressed air or wash
those filter bags; but before you do any of these, read over the instructions
given in the TM so the job will be done right and the filter won't get damaged.
And above all, be certain to clean out the filter pac compartments.

 HERE'S HOW TO CLEAN 'EM! )


 K- "-_ 0' CAREFULLY
 REMOVE SPACERS... RELEASE RUBBER CAP... DON'T BEAT
 2. Misalined filter pac. Are your filter pacs installed right? The installations
 shown in these TM illustrations are wrong and have been rescinded.


 ig61,TM9-32038 g 85 M92300216-10

--" *Ai.tfg, ar. **. *-. ,:-:' .. :. ..f i. f-. ^. .- .