Here's how: Make sure you pull the power plug from the back
of the dehydrator before you do anything else. Then remove the
dehydrator from the radar.


 Now mark and disconnect the
air hoses, take the two desiccant
containers out of the cabinet.


 Next remove the two wiring
damp loops that secure the motor
wiring to the air intake filer
bracket


 Remove the motor and compressor assem-
bly from the cabinet. You won't have to dis-
connect the wires if you're careful.
 There're four mounting bolts that hold
motor and compressor assembly to bottom
of cabinet. Remove them. t's easier if you
take out the front ones first.
 Shift compressor end of assembly to one
side and lift up. Easy does it.


 Set the assembly on something flat.
Now take a look at the back of the
gear box. You'll find three screws in
the back arranged like a triangle. The
top screw head's smaller than the two
lower ones. The top screw's the oil level
screw.


 Take the lock wire off that goes through the screw head and remove the screw.
The oil level should be up to this screw hole.


I TVP