ACTION
Lubing-Two big rules: FREEZES 
 1. Never use any lube not specified in your TRY A
 TM- no off-the-shelf stuff, hear? Actu- PROP OF. 4
 ally, it'd be better not to lube your1XM148 \
 at all than to use the wrong stuff.
 2. Lube lightly--like with a dean rag
 dampened with PL Special. Too much
 lube's worse than no lube, too. Oil's like e w
 a magnet--attracts dust and dirt ..
 and trouble, when it's over-done.

 USE YOUR EYEBALLS
 Make a practice of checking for cracks, burrs, severe wear, loose or missing
 parts, powder-fouling, rust, weak springs and the like every time you take your
 weapon apart and clean it. This is the best time to see if they're OK. Fix what-
 ever you're authorized to, and get your armorer or support to replace or repair
 anything else. Just make sure that launcher's ready for action at all times!

 DOUBLE CHECK THESE PARTS
 TO PREVENT COCKING, FIRING ANP
 EXTRACT(NG TROUBLES!

 FIRING PIN- Badly
 FIRING PIN ACCESS- worn, busted, burred, f
 Dirty, powder-fouled, rusty, threads worn or
 threads badly worn. damaged. TRIGGER SPRING -


15A ORE