SHUTDOWN
 Closing up the store the right way is another big piece of insurance. Fact is,
you can't start right the next day unless you stop right when shutdown time
arrives.
 With the load eased off, you cool at
idle 10 minutes. If there's an Idle Con-
trol, use it. You can use up your excess
air to clean out your tools, blowing out
muck and water.
 Idled long enough? Whoa, now-detail, Halt! Right
 now is time for a magic charm on that Joy 250, if yours
 S..j is such-
 Just before you chop that ignition, rev 'er up to 1500
 RPM for a minute-then, Whammy! Off she goes, and
 Just a few seconds does it.
 This you do to avoid hydraulic lock when you fire up again. The Joy 250
has a small sump, and it's got a temperamental oil inlet valve on the older
models. If those rotors get crammed with oil, oil that won't compress, that means
sheared vanes when you kick 'er over again.

HOSE REELS- Make sure LO's-Look for dry OILERS-Service now
rbere're no kinks. That bearings, drippy and count noses; all
Dasey will snap hoses if gaskets, hot spots. present?
)ou let it, or unless you If you find metal
get support to put in a spe- chips in oil, call
cial 30" ell. support.


63MO