138 / FIELDS OF INSTRUCTION methods for obtaining numerical solutions to fluid flow, heat transfer, and combustion problems. EML 5714-Gas Dynamics of Internal Flow Systems (3) Emphasis on one-dimensional compressible flow. EML 6103-Advanced Thermodynamics (3) Thermodynamics of nonsimple systems. Multicomponent and multiphase thermody- namic analysis. EML 6132-Combustion II (3) Prereq: EML 5131. Advanced analysis of combustion systems; diageostic techniques, and nu- merical procedures for modeling experimental and practical systems. EML 6154-Conduction Heat Transfer (3) Prereq: MAP 3302, EML 4140. Studies of heat conduction in homogeneous, hetero- geneous, isotropic, anisotropic, stationary, moving bodies in Cartesian, cylindrical and spherical systems. Both exact and approximate solutions stressed. EML 6155-Convective Heat Transfer I (3) Prereq: EML 6716 or equivalent. Application of the equations of motion to forced and free convection with laminarflow. Solution techniques to include simplification to ordinary differential equations, boundary layer approximations, similarity transformations, and integral approxi- mations. Phenomenological treatment of turbulent transport. EML 6157-Radiation Heat Transfer (3) Prereq:MAP3302, EML 4140. Theory and analysis for radiation exchange in both trans- parent and absorbing, emitting and scattering medium. EML 6159-Special Topics in Heat Transfer (3) Prereq: EML 4140. EML 6267-Structural Dynamics of Production Machinery (3) Review mechanical vibrations with two degrees of freedom. Natural and forced vibrations of multi-degree-of-freedom sys- tems. Experimental and computational modal analysis and syn- thesis. Vibrations of machine tools, rolling mills, robots. EML 6274-Dynamic Synthesis of Direct Contact Mechanisms (3) Prereq:EML 3262. The design of direct contact mechanisms by classical techniques of rigid body systems and finite differences applied to systems composed of elastic components. EML 6275-Coplanar Kinematic Synthesis I (3) Prereq: EML 3262. Multiply separated position theory for 3, 4, and 5 positions of the moving system. Curvature transformation, circle point curves, and Burmester point theory. Treatment is analytical, with emphasis on the theory of algebraic curves. EML 6276-Coplanar Kinematic Synthesis II (3) Prereq: EML 6275. Application of theory in EML 6275. Point-path, coplanar and function generation synthesis problems for linear, circular, or geared constraints. Reduction of parameters and optimization concepts. EML 6278-Advanced Rotor Dynamics (3) Prereq: EML 4263 or 4220 and consent of instructor. Analysis of dynamic stability, critical speeds, and unbalance response of rotor-bearing systems. Special problems encountered in modern application operating through and above the critical speeds. EML 6281-Geometry of Mechanisms and Robots I (3) Develop- ment of applications to basic theory of the mathematics required in the design of spatial mechanisms and robot arms. Examples include mathematical description of the elements of mechanisms and robot arms, namely linkages and joints, their mobility and their analysis. EML 6282-Geometry of Mechanisms and Robots II (3) Theory of screws and application to the determination of stationary and uncertainty configurations of mechanisms and robot arms. Dex- terity and workspace of robot arms. EML 6283-Geometry of Mechanisms and Robots III (3) Prereq: EML 6282. Continuation of EML 6282. EML 6306L-Instrumentation and Measurements Laboratory (1) EML 6324-Fundamentals of Production Engineering (3) Funda- mentals of metal cutting, metal forming, and welding. Accuracy and rigidity of machine tools. Automation, numerical control, adaptive control. EML 6417-Solar Energy Utilization (3; max: 6) Solar energy; its availability and characteristics; its conversion and utilization as heat for power, refrigeration, distillation, photochemical reac- tions, solar energy as a research tool. EML 6418-Special Topics in Solar Energy (3; max: 9) Prereq: undergraduate course in thermodynamics and heat transfer. Se- lective surfaces, solar traps, solar energy storage, solar fuel cells, direct conversion of solar radiation. EML 6451-Energy Conversion (3) Conversion of available forms of energy into mechanical and electrical forms; energy conversion schemes, including conventional cycles in unusual environ- ments. MHD, solar cells, thermionic and photogalvanic conver- sion and fuel cells. EML 6506-Sliding-Element Bearing Analysis and Design (3) Prereq: EML 4701, ENG 3353, or EAS 4106. Theory and design analysis of hydrodynamic bearings and boundary lubricated sliding bearing. EML 6507-Rolling-Element Bearing Analysis and Design (3) Prereq: EML 4500 and 4501 or EGM 5533. Theory and design analysis of ball bearings and roller bearings. EML 6508-Computer-Aided Design: Optimization (3) Prereq: EML 5527, ESI 4312. Parameter optimization techniques in machine systems. EML 6597-Mechanics of Gait (3) Prereq: EML 5525. Concepts, nomenclature, and control mechanics of normal and pathological bipedal gait. EML 6606-Advanced Air Conditioning (3) Prereq: EML 4600. Air-conditioning system selection and system design; air handling techniques including noise control, cleaning, temperature and humidity control; modern technological development and eco- nomic analysis. EML 6607-Advanced Air Conditioning 11 (3) Prereq: EML 6606. Industrial applications, special requirements for hospitals, sur- vival shelter criteria. EML 6716-Advanced Fluid Dynamics (3) Prereq: EML 4701. Extends the previous fluid flow courses to include a wider range of subject material and provide a background for convection heat transfer courses. EML 6717-Thermodynamics of Fluid Flow I (3) Prereq: EML 4701. Compressible flow; emphasis on two-dimensional flow in internal flow systems. EML 6718-Thermodynamics of Fluid Flow II (3) Prereq: EML 6717. Continuation of EML 6717. Emphasis on axisymmetric, unsteady, and hypersonic flow. EML 6726-Advanced Computational Fluid Dynamics (3) Pre- req:EML 5719and6716. Application of finite-difference methods to the study of steady and unsteady multidimensional flows, including compressible and incompressible, laminar and turbu- lent, reacting and nonreacting, viscous and inviscid. EML 6729-Topics in Fluid Dynamics (3) Prereq: EML 4701. EML 6905-Individual Projects in Mechanical Engineering (1-3; max: 12) EML 6910-Supervised Research (1-3; max: 5) S/U. EML 6911--Mechanical Research (1-3; max: 6) Research projects in mechanical engineering. EML 6934-Special Topics in Mechar' al Engineering (1-4; max: 9) EML 6936-Nonthesis Project (1-4; max: 6) An in-depth project for graduate students not pursuing a thesis master's degree. S/U. EML 6940-Supervised Teaching (1-5; max: 5) S/U. EML 6971-Research for Master's Thesis (1-15) S/U. EML 6972-Research for Engineer's Thesis (1-15) S/U. EML 7979-Advanced Research (1-9) Research for doctoral students before admission to candidacy. Designed for students with a master's degree in the field of study or for students who have been accepted for a doctoral program. Not open to students who have been admitted to candidacy. S/U. EML 7980-Research for Doctoral Dissertation (1-15) S/U. MEDICAL SCIENCES-GENERAL College of Medicine The College of Medicine offers programs leading to the Doctor of Philosophy and Master of Science degrees in medical sciences, with specialization in anatomy and cell