These exclusive Mildoor features prove...

Malldoor is specially engineered

for shopping mall installations.
 SKEYLOCK
 Mortise cylinder (Adams Rite #4036.)
 1-5/32" diameter with a 5-pin tumbler. Fin-
 ished in hardcolor 313 medium-bronze color.
 One key is provided per cylinder. Available
 Skewed differently, keyed alike or master keyed
 Swon special order.

 COMMERCIAL HARDWARE
 Adams Rite@ MS1850A-505 deadbolt assem-
 bly, with heavy-duty laminated steel bolt,
 Provides heavy-duty operation with security.
 S.. Thumbturn inside and a mortise cylinder out-
 side are standard.

 BACKUP SECURITY DEVICE
 This device, attached to the inside of the stile,
 Shas been tested to withstand forced entry of
 400 pounds. Yet, the foot-operated, spring-
 loaded device is easily released from the in-
 side. When the cold-rolled, plated steel bolt is
 engaged into the track grommet (in conjunc-
 Stion with top lift restraint), the door is prevent-
 e d from being forced off the track runner.

 TANDEM STEEL ROLLERS
 Roller assembly has two steel ball-bearing roll-
 ers in a 16-gauge steel cold-rolled, stamped
 case. It is capable of supporting up to 400
 pounds per roller assembly.

 RO-- TT H .E LOW PROFILE TRACK
 SMaximum height of track is 9/16 Basic double
 track is supplied with single or double add-on
 pieces to make an infinite number of runners.
 Low-sloping thresholds are available for the
 interior and exterior side of the door for on-
 floor installation. Track can be installed into
 floor recess for flush floor installation.
 PANEL ADJUSTMENT
 Tandem roller assemblies are easily adjusted
 from the interior side of the unit with panels in
 either the "locked" or "unlocked" position.
 Adjustments hole is concealed with a remov-
 able black nylon plug.


 These features, combined with the monumental extrusions, give you a shopping
 mall door system that's big, tough and beautiful (available in our exclusive Mag-
 nacolor white, bronze or silver).
 Malldoor is available in any number of panels, in 9 ft. heights (or higher on
 special order) for pocket or stack applications.
 There are many more features.They're all detailed in our new Malldoor specifi-
 cations folder which includes a complete set of full-size extrusion profiles...
 send for it. Stimulate your imagination.


 Mimildoor
 A Division of Miller Industries, Inc.
 16295 N.W. 13th Ave., Miami, FL 33169-0910 305-621-0501 Florida 1-800-432-3116 National 1-800-446-7628
 PRODUCTS THAT HAVE PASSED THE TEST OF TIME
 SLIDING GLASS DOORS BATH AND SHOWER ENCLOSURES SLIDING GLASS MIRROR CLOSET DOORS "SINGLE HUNG AND ROLLING WINDOWS